Optional) Configuring A Static Route Between An Mce And A Pe - Huawei S6700 Series Configuration Manual

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
Pre-configuration Tasks
Before configuring a route multi-instance between an MCE and a PE, complete the following
task:
l
Data Preparation
To configure a route multi-instance between an MCE and a PE, you need the following data.
No.
1
2
3
4
5
6
11.5.2 (Optional) Configuring a Static Route Between an MCE and
a PE
Context
Do as follows on the MCE.
You can use a static route on a PE, and can also use RIP, OSPF, IS-IS, or BGP. For details, refer
to manuals of corresponding products.
Issue 01 (2012-03-15)
11.3 Configuring a VPN Instance
Data
Name of the VPN instance
(Optional) Destination address of a static route to the PE, name of the
destination VPN instance, mask or mask length, next hop IP address,
priority of the route, and description of the route
(Optional) RIP process number, address of the network segment where
the VLANIF interface bound to the VPN instance is located, type and
process number of the routing protocol run between an MCE and a site,
cost of the imported route, and name of the routing policy used during
route importing
(Optional) OSPF process number, router ID of OSPF, area ID of OSPF,
address of the network segment where the VLANIF interface bound
to the VPN instance is located, type and process number of the routing
protocol run between an MCE and a site, cost of the imported route,
metric of the imported route, tag in the external LSA of the imported
route, and name of the routing policy during route importing
(Optional) IS-IS process number, NET of the IS-IS process, number
of the VLANIF interface bound to the VPN instance, type and process
number of the routing protocol run between an MCE and a site, type
and value of the cost of the imported route, administrative tag of the
imported route, and level of the routing table for storing the imported
route
(Optional) AS number, IP address of the VLANIF interface connecting
a CE and an MCE, type and process number of the routing protocol
run between an MCE and a site, MED of the imported route, and name
of the routing policy during route importing
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 MCE Configuration
637