Huawei S6700 Series Configuration Manual page 185

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
5.
6.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Configure VLANs that interfaces belong to.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan batch 10 20
[SwitchA] interface xgigabitethernet 0/0/1
[SwitchA-XGigabitEthernet0/0/1] port hybrid pvid vlan 10
[SwitchA-XGigabitEthernet0/0/1] port hybrid untagged vlan 10
[SwitchA-XGigabitEthernet0/0/1] quit
[SwitchA] interface xgigabitethernet 0/0/2
[SwitchA-XGigabitEthernet0/0/2] port hybrid pvid vlan 20
[SwitchA-XGigabitEthernet0/0/2] port hybrid untagged vlan 20
[SwitchA-XGigabitEthernet0/0/2] quit
The configurations of SwitchB, SwitchC, SwitchD, SwitchE and SwitchF are similar to the
configuration of SwitchA, and are not mentioned here.
Step 2 Assign an IP address to each VLANIF interface.
[SwitchA] interface vlanif 10
[SwitchA-Vlanif10] ip address 10.1.1.1 30
[SwitchA-Vlanif10] quit
[SwitchA] interface vlanif 20
[SwitchA-Vlanif20] ip address 10.1.2.1 30
[SwitchA-Vlanif20] quit
The configurations of SwitchB, SwitchC, SwitchD, SwitchE and SwitchF are similar to the
configuration of SwitchA, and are not mentioned here.
Step 3 Configure basic OSPF functions.
The configuration details are not mentioned here.
Step 4 Configure an IBGP full connection.
# Configure Switch A.
<SwitchA> system-view
[SwitchA] interface LoopBack 0
[SwitchA-LoopBack0] ip address 1.1.1.1 32
[SwitchA-LoopBack0] quit
Issue 01 (2012-03-15)
Configure the OSPF process and configure BGP to import directly connected routes on
Switch D.
Configure BGP on Switch E.
The router ID of Switch A is 1.1.1.1, the AS number is 10, the OSPF process number is 1,
and the network segments in Area 0 are 10.1.1.0/30 and 10.1.2.0/30.
The router ID of Switch B is 2.2.2.2, the AS number is 10, the OSPF process number is 1,
and the network segments in Area 0 are 10.1.1.0/30 and 10.1.3.0/30.
The router ID of Switch C is 3.3.3.3, the AS number is 10, the OSPF process number is 1,
and the network segments in Area 0 are 10.1.2.0/30 and 10.1.4.0/30.
The router ID of Switch D is 4.4.4.4, the AS number is 10, the OSPF process number is 1,
and the network segments in Area 0 are 10.1.3.0/30 and 10.1.4.0/30.
The router ID of Switch E is 5.5.5.5, and the AS number is 20.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 OSPF Configuration
166