Huawei S6700 Series Configuration Manual page 36

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
RelayNextHop : ::
Interface
Destination
NextHop
Cost
RelayNextHop : ::
Interface
# Run the ping command to verify the configuration.
[Switch A] ping ipv6 3::1
PING 3::1 : 56
--- 3::1 ping statistics ---
# Run the tracert command to verify the configuration.
[Switch A] tracert ipv6 3::1
traceroute to 3::1
1 2::1 31 ms
2 3::1 62 ms
----End
Configuration Files
l
Issue 01 (2012-03-15)
: Vlanif10
: FE80::
: ::
: 0
: NULL0
data bytes, press CTRL_C to break
Reply from 3::1
bytes=56 Sequence=1 hop limit=254
Reply from 3::1
bytes=56 Sequence=2 hop limit=254
Reply from 3::1
bytes=56 Sequence=3 hop limit=254
Reply from 3::1
bytes=56 Sequence=4 hop limit=254
Reply from 3::1
bytes=56 Sequence=5 hop limit=254
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 62/62/63 ms
30 hops max,60 bytes packet
32 ms 31 ms
63 ms 62 ms
Configuration file of Switch A
#
sysname Switch A
#
ipv6
#
vlan batch 10 20
#
interface Vlanif10
ipv6 enable
ipv6 address 1::1/64
#
interface Vlanif20
ipv6 enable
ipv6 address auto link-local
#
interface XGigabitEthernet0/0/1
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
interface XGigabitEthernet0/0/2
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
ipv6 route-static :: 0 vlanif20 FE80::218:20FF:FE00:80
#
return
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 IP Static Route Configuration
TunnelID
Flags
PrefixLength : 10
Preference
Protocol
TunnelID
Flags
time = 63 ms
time = 62 ms
time = 62 ms
time = 63 ms
time = 63 ms
: 0x0
: D
: 0
: Direct
: 0x0
: D
17