Huawei S6700 Series Configuration Manual page 463

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
Figure 7-4 Networking diagram for configuring basic BGP functions
XGE0/0/2
Switch
SwitchA
SwitchA
SwitchB
SwitchB
SwitchB
SwitchC
SwitchC
SwitchD
SwitchD
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Issue 01 (2012-03-15)
XGE0/0/1
Switch A
AS65008
Interface
XGE 0/0/1
XGE 0/0/2
XGE 0/0/1
XGE 0/0/2
XGE 0/0/3
XGE 0/0/1
XGE 0/0/2
XGE 0/0/1
XGE 0/0/2
Set up IBGP peer relationships between SwitchB, SwitchC and SwitchD.
Create an EBGP peer relationship between SwitchA and SwitchB.
Advertise routes through the network command on SwitchA and check the routing tables
of SwitchA, SwitchB, and SwitchC.
Configure BGP on SwitchB to import direct routes, and check the routing tables of
SwitchA and SwitchC.
The VLAN ID of each interface is shown in
The IP address of each VLANIF interface is shown in
The router ID of SwitchA is 1.1.1.1 and the number of the AS where it resides is 65008.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
XGE0/0/2
XGE0/0/1
Switch B
XGE0/0/3
AS65009
VLANIF Interface
VLANIF 10
VLANIF 50
VLANIF 10
VLANIF 20
VLANIF 30
VLANIF 20
VLANIF 40
VLANIF 30
VLANIF 40
Figure
7 BGP Configuration
Switch C
XGE0/0/1
XGE0/0/2
XGE0/0/2
XGE0/0/1
Switch D
IP Address
200.1.1.2/24
8.1.1.1/8
200.1.1.1/24
9.1.3.1/24
9.1.1.1/24
9.1.3.2/24
9.1.2.1/24
9.1.1.2/24
9.1.2.2/24
7-4.
Figure 7-4.
444