Huawei S6700 Series Configuration Manual page 605
Ip routing
Hide thumbs
Also See for S6700 Series:
- Configuration manual (295 pages) ,
- Hardware description (115 pages) ,
- Hardware installation and maintenance manual (183 pages)
Table of Contents
Advertisement
S6700 Series Ethernet Switches
Configuration Guide - IP Routing
[SwitchB-Vlanif300] pim sm
[SwitchB-Vlanif300] quit
# Configure Switch C.
[SwitchC] multicast routing-enable
[SwitchC] interface Vlanif 400
[SwitchC-Vlanif400] pim sm
[SwitchC-Vlanif400] quit
[SwitchC] interface Vlanif 102
[SwitchC-Vlanif102] pim sm
[SwitchC-Vlanif102] igmp enable
[SwitchC-Vlanif102] quit
[SwitchC] interface Vlanif 300
[SwitchC-Vlanif300] pim sm
[SwitchC-Vlanif300] quit
# Configure Switch D.
[SwitchD] multicast routing-enable
[SwitchD] interface Vlanif 400
[SwitchD-Vlanif400] pim sm
[SwitchD-Vlanif400] quit
[SwitchD] interface Vlanif 200
[SwitchD-Vlanif200] pim sm
[SwitchD-Vlanif200] quit
Step 5 Configure BSR and RP within each AS.
# Configure Switch A.
[SwitchA] interface LoopBack 0
[SwitchA-LoopBack0] ip address 1.1.1.1 255.255.255.255
[SwitchA-LoopBack0] pim sm
[SwitchA-LoopBack0] quit
[SwitchA] pim
[SwitchA-pim] c-bsr LoopBack 0
[SwitchA-pim] c-rp LoopBack 0
[SwitchA-pim] quit
# Configure Switch B.
[SwitchB] interface LoopBack 0
[SwitchB-LoopBack0] ip address 2.2.2.2 255.255.255.255
[SwitchB-LoopBack0] pim sm
[SwitchB-LoopBack0] quit
[SwitchB] pim
[SwitchB-pim] c-bsr LoopBack 0
[SwitchB-pim] c-rp LoopBack 0
[SwitchB] quit
Step 6 Configure the BSR boundary on the interfaces connecting two ASs.
# Configure Switch A.
[SwitchA] interface Vlanif 100
[SwitchA-Vlanif100] pim bsr-boundary
[SwitchA-Vlanif100] quit
# Configure Switch B.
[SwitchB] interface Vlanif 100
[SwitchB-Vlanif100] pim bsr-boundary
[SwitchB-Vlanif100] quit
Step 7 Configure MSDP peers.
# Configure Switch A.
Issue 01 (2012-03-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 MBGP Configuration
586
Advertisement
Table of Contents
