Resetting A Specific Is-Is Neighbor; Configuration Examples - Huawei S6700 Series Configuration Manual

Hide thumbs Also See for S6700 Series:

Table of Contents

S6700 Series Ethernet Switches

Configuration Guide - IP Routing

The IS-IS data structure cannot be restored after you reset it. All the previous structure

information and the neighbor relationship are reset. Exercise caution when running this

To clear the IS-IS data structure, run the following reset command in the user view.

Step 1 Run reset isis all [ process-id | vpn-instance vpn-instance-name ] command to reset the IS-IS

data structure.

By default, the IS-IS data structure is not reset.

6.17.2 Resetting a Specific IS-IS Neighbor

By restarting IS-IS neighbors, you can reset the IS-IS neighbor relationship, and thus make the

new configuration take effect.

The specified IS-IS neighbor relationship is deleted after you reset a specified IS-IS neighbor

by using the reset isis peer command. Exercise caution when running this command.

After the IS-IS routing policy or the protocol changes, you can reset a specific IS-IS neighbor

to validate the new configuration.

To reset a specific IS-IS neighbor, run the following reset command in the user view.

Step 1 Run reset isis peer system-id [ process-id | vpn-instance vpn-instance-name ] command to reset

a specific IS-IS neighbor.

This section provides examples of IS-IS configuration.

Issue 01 (2012-03-15)

Huawei Proprietary and Confidential

6 IS-IS Configuration