Huawei S6700 Series Configuration Manual page 569

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
[Switch C] bgp 200
[Switch C-bgp] router-id 3.3.3.3
[Switch C-bgp] peer 101::2 as-number 200
[Switch C-bgp] peer 102::2 as-number 200
[Switch C-bgp] ipv6-family unicast
[Switch C-bgp-af-ipv6] peer 101::2 enable
[Switch C-bgp-af-ipv6] peer 102::2 enable
[Switch C-bgp-af-ipv6] network 101:: 96
[Switch C-bgp-af-ipv6] network 102:: 96
# Configure Switch D.
[Switch D] bgp 200
[Switch D-bgp] router-id 4.4.4.4
[Switch D-bgp] peer 102::1 as-number 200
[Switch D-bgp] ipv6-family unicast
[Switch D-bgp-af-ipv6] peer 102::1 enable
Step 4 Configure the route reflector.
# Configure Switch C as the route reflector and Switch B and Switch D as the clients.
[Switch C-bgp] ipv6-family unicast
[Switch C-bgp-af-ipv6] peer 101::2 reflect-client
[Switch C-bgp-af-ipv6] peer 102::2 reflect-client
# View the routing table of Switch B.
[Switch B] display bgp ipv6 routing-table
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
Total Number of Routes: 6
*>
*>
*>
*>
*>
*>i Network
Issue 01 (2012-03-15)
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
Network : 1::
NextHop : 100::1
MED : 0
Label :
Path/Ogn : 100 i
Network : 100::
NextHop : ::
MED : 0
Label :
Path/Ogn : ?
Network : 100::2
NextHop : ::
MED : 0
Label :
Path/Ogn : ?
Network : 101::
NextHop : ::
MED : 0
Label :
Path/Ogn : ?
NextHop : 101::1
MED : 0
Label :
Path/Ogn : ?
Network : 101::2
NextHop : ::
MED : 0
Label :
Path/Ogn : ?
: 102::
NextHop : 101::1
MED : 0
Label :
Path/Ogn : ?
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i - internal, s - suppressed, S - Stale
8 BGP4+ Configuration
PrefixLen : 64
LocPrf :
PrefVal : 0
PrefixLen : 96
LocPrf :
PrefVal : 0
PrefixLen : 128
LocPrf :
PrefVal : 0
PrefixLen : 96
LocPrf :
PrefVal : 0
LocPrf : 100
PrefVal : 0
PrefixLen : 128
LocPrf :
PrefVal : 0
PrefixLen : 96
LocPrf : 100
PrefVal : 0
550