Setting The Interval For Sending Packets And The Maximum Number Of The Sent Packets; Configuring Split Horizon And Poison Reverse - Huawei S6700 Series Configuration Manual

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
2.8.3 Setting the Interval for Sending Packets and the Maximum
Number of the Sent Packets
By setting the interval for sending RIP Update packets and the maximum number of Update
packets to be sent each time, you can effectively control the memory used by a Switch to process
RIP Update packets.
Context
Do as follows on the RIP switch:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
The interface must be a VLANIF interface.
Step 3 Run:
rip pkt-transmit { interval interval | number pkt-count }
The interval for sending Update packets and the maximum number of packets sent each time
are set on the interface.
----End

2.8.4 Configuring Split Horizon and Poison Reverse

You can configure split horizon and poison reverse to prevent routing loops.
Context
If both split horizon and poison reverse are configured, only poison reverse takes effect.
Do as follows on the RIP switch:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
The interface must be a VLANIF interface.
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 RIP Configuration
*
45