Huawei S6700 Series Configuration Manual page 641

Hide thumbs Also See for S6700 Series:

Table of Contents

S6700 Series Ethernet Switches

Configuration Guide - IP Routing

Figure 10-2 Networking diagram of applying a routing policy for imported routes

Configuration Roadmap

The configuration roadmap is as follows:

Data Preparation

To complete the configuration, you need the following data:

Configuration Procedure

Issue 01 (2012-03-15)

Create the ID of the VLAN to which each interface belongs.

Assign an IP address to each VLANIF interface.

Configure basic IS-IS functions on Switch-B and Switch-C.

Configure OSPF on Switch-A and Switch-B and import IS-IS routes.

Configure a routing policy on Switch-B and apply the routing policy when OSPF imports

IS-IS routes, and verify the routes.

The IS-IS level of Switch-C is Level-2. The system ID is ID 0000.0000.0001. The IS-IS

level of Switch-B is Level-2. The system ID is ID 0000.0000.0002. The area number of

Switch-B and Switch-C is 10.

Switch-A and Switch-B are located in Area 0, that is, the backbone area.

Configure the names of the filtering list and IP prefix list. The cost of the route 172.17.1.0/24

is 100 and the tag of the route 172.17.2.0/24 is 20.

Create a VLAN to which each interface belongs.

The configuration details are not mentioned here.

Huawei Proprietary and Confidential

VLANIF Interface

10 Routing Policy Configuration

192.168.1.1/24

192.168.1.2/24

192.168.2.2/24

192.168.2.1/24

172.17.1.1/24

172.17.2.1/24

172.17.3.1/24