Huawei S6700 Series Configuration Manual page 479

Hide thumbs Also See for S6700 Series:

Table of Contents

S6700 Series Ethernet Switches

Configuration Guide - IP Routing

Figure 7-7 Networking diagram of BGP route selection

Configuration Roadmap

The configuration roadmap is as follows:

Data Preparation

To complete the configuration, you need the following data:

Configuration Procedure

Issue 01 (2012-03-15)

Set up EBGP peer relationships between SwitchA and SwitchB, and between SwitchA and

SwitchC. Create an IBGP peer relationship between SwitchB and SwitchC.

Configure load balancing and the MED on SwitchA and check the routing table.

The VLAN ID of each interface is shown in

The IP address of each VLANIF interface is shown in

The router IDs of SwitchA is 1.1.1.1, the number of the AS where it resides is 65008, and

the number of routes for load balancing is 2.

The router IDs of SwitchB and SwitchC are 2.2.2.2 and 3.3.3.3, the number of the AS where

they reside is 65008, the default MED of SwitchB is 100.

Create a VLAN to which each interface belongs.

The configuration details are not mentioned here.

Huawei Proprietary and Confidential

VLANIF Interface

7 BGP Configuration

200.1.1.2/24

200.1.2.2/24

200.1.1.1/24

200.1.2.1/24