Establishing The Configuration Task; Applying Route-Policy To Routes Imported By Rip - Huawei S6700 Series Configuration Manual

S6700 Series Ethernet Switches
Configuration Guide - IP Routing

10.7.1 Establishing the Configuration Task

Before applying filters to imported routes, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
After defining the filters including the IP prefix list, ACL, and Route-Policy related to the routing
policy, you need to import the filters to the protocols.
l
Pre-configuration Tasks
Before applying filters to imported routes, complete the following tasks:
l
l
l
Data Preparation
To apply filters to imported routes, you need the following data.
No.
1
2
3

10.7.2 Applying Route-Policy to Routes Imported by RIP

By applying filters, you can control the import of RIP routes.
Context
Do as follows on the switch that runs RIP:
Issue 01 (2012-03-15)
Applying the policy to import external routes
– Use the import-route command in the protocol view. Import the required external
routes to the protocols and apply a Route-Policy to the imported routes.
– After the external routes are imported, run the filter-policy export to filter the routes.
Only the routes that meet the matching rules are advertised.
NOTE
l BGP has powerful filtering functions. For details of BGP configuration, refer to
Configuration.
l You can run the filter-policy command and the import-route command with different parameters for
RIP, OSPF, IS-IS, and BGP. For details, refer to related configurations.
Configuring the IP-Prefix List
Configuring an ACL
Configuring the Route-Policy
Data
Name of the IP prefix list
Name of the ACL
Name of the Route-Policy and node number
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Routing Policy Configuration
BGP
611