Huawei S6700 Series Configuration Manual page 156
Ip routing
Hide thumbs
Also See for S6700 Series:
- Configuration manual (295 pages) ,
- Hardware description (115 pages) ,
- Hardware installation and maintenance manual (183 pages)
Table of Contents
Advertisement
S6700 Series Ethernet Switches
Configuration Guide - IP Routing
Switch F
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Configuration Procedure
1.
2.
3.
Issue 01 (2012-03-15)
XGE 0/0/1
Create the ID of a VLAN to which each interface belongs.
Assign an IP address to each VLANIF interface.
Enable OSPF on each Switch and specify network segments in different areas.
Check the routing table and LSDB.
The ID of the VLAN that each interface belongs to is shown in
The IP address of each interface is shown in
The router ID of each Switch, the OSPF process ID, and the area to which each interface
belongs are as follows.
– The router ID of Switch A is 1.1.1.1, the OSPF process ID is 1, the network segment
of Area 0 is 192.168.0.0/24, and the network segment of Area 1 is 192.168.1.0/24.
– The router ID of Switch B is 2.2.2.2, the OSPF process ID is 1, the network segment of
Area 0 is 192.168.0.0/24, and the network segment of Area 2 is 192.168.2.0/24.
– The router ID of Switch C is 3.3.3.3, the OSPF process ID is 1, the network segments
of Area 1 are 192.168.1.0/24 and 172.16.1.0/24.
– The router ID of Switch D is 4.4.4.4, the OSPF process ID is 1, and the network segments
of Area 2 are 192.168.2.0/24 and 172.17.1.0/24.
– The router ID of Switch E is 5.5.5.5, the OSPF process ID is 1, and the network segment
of Area 1 is 172.16.1.0/24.
– The router ID of Switch F is 6.6.6.6, the OSPF process ID is 1, and the network segment
of Area 2 is 172.17.1.0/24.
Create a VLAN to which each interface belongs.
The configuration details are not mentioned here.
Assign an IP address to each interface.
The configuration details are not mentioned here.
Configuring Basic OSPF Functions.
# Configure Switch A.
[SwitchA] router id 1.1.1.1
[SwitchA] ospf
[SwitchA-ospf-1] area 0
[SwitchA-ospf-1-area-0.0.0.0] network 192.168.0.0 0.0.0.255
[SwitchA-ospf-1-area-0.0.0.0] quit
[SwitchA-ospf-1] area 1
[SwitchA-ospf-1-area-0.0.0.1] network 192.168.1.0 0.0.0.255
[SwitchA-ospf-1-area-0.0.0.1] quit
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
VLANIF 50
Figure
Figure
4-5.
4 OSPF Configuration
172.17.1.2/24
4-5.
137
Advertisement
Table of Contents
