Huawei S6700 Series Configuration Manual page 235

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
# Configure Switch D.
[Switch D] ospfv3
[Switch D-ospfv3-1] router-id 4.4.4.4
[Switch D-ospfv3-1] quit
[Switch D] interface vlanif 40
[Switch D-Vlanif40] ospfv3 1 area 2
[Switch D-Vlanif40] quit
# View the status of the OSPFv3 neighbors of Switch B.
[Switch B] display ospfv3 peer
OSPFv3 Process (1)
OSPFv3 Area (0.0.0.1)
Neighbor ID
1.1.1.1
OSPFv3 Area (0.0.0.0)
Neighbor ID
3.3.3.3
# View the status of the OSPFv3 neighbors of Switch C.
[Switch C] display ospfv3 peer
OSPFv3 Process (1)
Area (0.0.0.0)
Neighbor ID
2.2.2.2
OSPFv3 Area (0.0.0.2)
Neighbor ID
4.4.4.4
# View the OSPFv3 routing table of Switch D.
[Switch D] display ospfv3 routing
Codes : E2 - Type 2 External, E1 - Type 1 External, IA - Inter-Area,
OSPFv3 Process (1)
IA 1000::/64
IA 1001::/64
IA 2000::/64
Step 4 Configure the stub areas.
# Configure the stub area of Switch D.
[Switch D] ospfv3
[Switch D-ospfv3-1] area 2
[Switch D-ospfv3-1-area-0.0.0.2] stub
[Switch D-ospfv3-1-area-0.0.0.2] quit
# Configure the stub area of Switch C, and set the cost of the default route advertised to the stub
area to 10.
[Switch C] ospfv3
[Switch C-ospfv3-1] area 2
[Switch C-ospfv3-1-area-0.0.0.2] stub
[Switch C-ospfv3-1-area-0.0.0.2] default-cost 10
[Switch C-ospfv3-1-area-0.0.0.2] quit
Issue 01 (2012-03-15)
Pri State
1 Full/DR
Pri State
1 Full/Backup
Pri State
1 Full/DR
Pri State
1 Full/Backup
N - NSSA, U - Uninstalled
Destination
Next-hop
via FE80::1572:0:5EF4:1, Vlanif40
via FE80::1572:0:5EF4:1, Vlanif40
1002::/64
directly-connected, Vlanif40
via FE80::1572:0:5EF4:1, Vlanif40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Dead Time Interface
00:00:34 Vlanif20
Dead Time Interface
00:00:32 Vlanif30
Dead Time Interface
00:00:37 Vlanif30
Dead Time Interface
00:00:33 Vlanif40
Metric
2
3
1
4
5 OSPFv3 Configuration
Instance ID
0
Instance ID
0
Instance ID
0
Instance ID
0OSPFv3
216