Optional) Configuring Is-Is Between An Mce And A Pe; Optional) Configuring Bgp Between An Mce And A Pe - Huawei S6700 Series Configuration Manual

Ip routing
Hide thumbs Also See for S6700 Series:
Table of Contents

Advertisement

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
Step 3 (Optional) Run the import-route { limt limt-number | protocol [ process-id ] [ cost cost | route-
policy route-policy-name |tag tag | type type ]
protocols.
If another routing protocol is run between an MCE and a site in this VPN, you need to perform
this step.
Step 4 Run the area { area-id | area-id-address } command to create an OSPF area and enter the OSPF
area view.
Step 5 Run the network ip-address wildcard-mask command to enable OSPF routes on the network
segment where the IP address of the VLANIF interface bound to the VPN instance belongs.
----End

11.5.5 (Optional) Configuring IS-IS Between an MCE and a PE

Context
Do as follows on the MCE.
You need to perform similar configurations on a PE. For details, refer to manuals of
corresponding products.
Procedure
Step 1 Run the system-view command to enter the system view.
Step 2 Run the interface vlanif vlan-id command to enter the view of the VLANIF interface bound to
the VPN instance.
Step 3 Run the isis enable [ process-id ] command to enable IS-IS on the VLANIF interface.
By default, IS-IS is disabled on a VLANIF interface.
Step 4 Run the isis [ process-id ] vpn-instance vpn-instance-name command to create an IS-IS process
used by a VPN instance and enter the IS-IS view.
Step 5 Run the network-entity net command to configure a NET.
By default, no NET is configured for an IS-IS process.
Step 6 (Optional) Run the import-route protocol [ process-id ] [ cost-type { external | internal } |
cost cost | tag tag | route-policy route-policy-name | [ level-1 | level-2 | level-1-2 ] ]
to import routes from other routing protocols.
If another routing protocol is run between an MCE and a site in this VPN, you need to perform
this step.
----End

11.5.6 (Optional) Configuring BGP Between an MCE and a PE

Issue 01 (2012-03-15)
NOTE
In this step, you must specify vpn-instance vpn-instance-name.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
} command to import routes from other routing
11 MCE Configuration
*
command
639

Advertisement

Table of Contents
loading

Table of Contents