Checking The Configuration; Configuring Ospfv3 Route Attributes; Establishing The Configuration Task - Huawei S6700 Series Configuration Manual

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
Follow-up Procedure
To connect switches to an NSSA, you need to run the nssa command to configure NSSA
attributes for the area to which the switches belong.
The area may be updated after NSSA attributes are configured or deleted. Thus, the NSSA
attributes can be re-configured or deleted only after the last update of NSSA attributes is
complete.

5.6.3 Checking the Configuration

After OSPFv3 NSSAs are configured, you can check OSPFv3 routing table information.
Prerequisites
The configurations for OSPFv3 NSSAs are complete.
Procedure
l
l
----End

5.7 Configuring OSPFv3 Route Attributes

By setting OSPFv3 route attributes, you can change OSPFv3 routing policies to meet the
requirements of complex networks.

5.7.1 Establishing the Configuration Task

Before configuring OSPFv3 route attributes, familiarize yourself with the applicable
environment, complete pre-configuration tasks, and obtain the required data. This can help you
complete the configuration task quickly and accurately.
Applicable Environment
In actual applications, to meet the requirements of a complicated networking environment, you
can change OSPFv3 routing policies by configuring OSPFv3 route attributes. Through the
following procedures, you can:
l
l
Pre-configuration Tasks
Before configuring OSPFv3 route attributes, complete the following tasks:
Issue 01 (2012-03-15)
Run the display ospfv3 area command to check information about OSPFv3 areas.
Run the commands as follow to check the OSPFv3 routing table.
– display ospfv3 [ process-id ] routing uninstalled
– display ospfv3 [ process-id ] routing [ abr-routes | asbr-routes | statistics
[ uninstalled ] | ipv6-address prefix-length | intra-routes | inter-routes | ase-routes |
nssa-routes ]
Set the cost on the OSPFv3 interface.
Configure load balancing among equal-cost routes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 OSPFv3 Configuration
199