Huawei S6700 Series Configuration Manual page 171

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
1.
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Configuration Procedure
1.
2.
3.
Issue 01 (2012-03-15)
Create the ID of a VLAN to which each interface belongs.
Assign an IP address to each VLANIF interface.
Configure the router ID of each Switch, enable OSPF, and specify network segments.
Check the DR or BDR status of each Switch.
Set the DR priority of the interface and check the DR or BDR status.
The ID of the VLAN to which each interface belongs is shown in
The IP address of each interface is shown in
The router ID of each Switch, the OSPF process ID, the area to which each interface
belongs, and DR priority are as follows:
– The router ID of Switch A is 1.1.1.1, the OSPF process ID is 1, the network segment
of Area 0 is 192.168.1.0/24, and the DR priority is 100.
– The router ID of Switch B is 2.2.2.2, the OSPF process ID is 1, the network segment of
Area 0 is 192.168.1.0/24, and the DR priority is 0.
– The router ID of Switch C is 3.3.3.3, the OSPF process ID is 1, the network segment of
Area 0 is 192.168.1.0/24, and the DR priority is 2.
– The router ID of Switch B is 4.4.4.4, the OSPF process ID is 1, the network segment of
Area 0 is 192.168.1.0/24, and the DR priority is 1.
Create a VLAN to which each interface belongs.
The configuration details are not mentioned here.
Assign an IP address to each interface.
The configuration details are not mentioned here.
4.14.1 Example for Configuring Basic OSPF
# Configure Switch A.
[SwitchA] router id 1.1.1.1
[SwitchA] ospf
[SwitchA-ospf-1] area 0
[SwitchA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[SwitchA-ospf-1-area-0.0.0.0] quit
[SwitchA-ospf-1] quit
# Configure Switch B.
[SwitchB] router id 2.2.2.2
[SwitchB] ospf
[SwitchB-ospf-1] area 0
[SwitchB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[SwitchB-ospf-1-area-0.0.0.0] quit
[SwitchB-ospf-1] quit
# Configure Switch C.
[SwitchC] router id 3.3.3.3
[SwitchC] ospf
[SwitchC-ospf-1] area 0
[SwitchC-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[SwitchC-ospf-1-area-0.0.0.0] quit
[SwitchC-ospf-1] quit
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure 4-8.
Functions.
4 OSPF Configuration
4-8.
152