Huawei S6700 Series Configuration Manual page 488

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
SwitchB
SwitchB
SwitchB
SwitchB
SwitchC
SwitchC
SwitchC
SwitchC
SwitchC
SwitchD
SwitchD
SwitchE
SwitchE
SwitchF
SwitchG
SwitchH
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Create VLANs and add interfaces to the corresponding VLANs.
<Quidway> system-view
[Quidway] sysname SwitchA
Issue 01 (2012-03-15)
XGigabitEthernet0/0/1
XGigabitEthernet0/0/2
XGigabitEthernet0/0/3
XGigabitEthernet0/0/4
XGigabitEthernet0/0/1
XGigabitEthernet0/0/2
XGigabitEthernet0/0/3
XGigabitEthernet0/0/4
XGigabitEthernet0/0/5
XGigabitEthernet0/0/1
XGigabitEthernet0/0/2
XGigabitEthernet0/0/1
XGigabitEthernet0/0/2
XGigabitEthernet0/0/1
XGigabitEthernet0/0/1
XGigabitEthernet0/0/1
Establish IBGP connections between the client and the RR, and between the non-client and
the RR.
Configure route reflection on Switch B and Switch C, specify the client, and check the
routes.
ID of the VLAN that each interface belongs to, as shown in
IP address of each VLANIF interface, as shown in
Number of the AS where all Switch s reside being 65010
Router IDs of Switch A, Switch B, Switch C, Switch D, Switch E, Switch F, Switch G, and
Switch H being 1.1.1.1, 2.2.2.2, 3.3.3.3, 4.4.4.4, 5.5.5.5, 6.6.6.6, 7.7.7.7, and 8.8.8.8
ID of the cluster where Switch B resides being 1 and ID of the cluster where Switch C
resides being 2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
VLANIF 10
VLANIF 20
VLANIF 40
VLANIF 50
VLANIF 30
VLANIF 20
VLANIF 70
VLANIF 80
VLANIF 90
VLANIF 40
VLANIF 60
VLANIF 50
VLANIF 60
VLANIF 70
VLANIF 80
VLANIF 90
Figure 7-9
Figure 7-9
7 BGP Configuration
10.1.1.1/24
10.1.2.1/24
10.1.4.1/24
10.1.5.1/24
10.1.3.1/24
10.1.2.2/24
10.1.7.1/24
10.1.8.1/24
10.1.9.1/24
10.1.4.2/24
10.1.6.1/24
10.1.5.2/24
10.1.6.2/24
10.1.7.2/24
10.1.8.2/24
10.1.9.2/24
469