Configuring A Bgp4+ Peer Group; Establishing The Configuration Task - Huawei S6700 Series Configuration Manual

Hide thumbs Also See for S6700 Series:

Table of Contents

S6700 Series Ethernet Switches

Configuration Guide - IP Routing

RelayNextHop : ::

RelayNextHop : ::

RelayNextHop : ::

RelayNextHop : ::

RelayNextHop : ::

RelayNextHop : ::

8.10 Configuring a BGP4+ Peer Group

By configuring a BGP4+ peer group, you can simplify the management of routing policies, and

thus improve the efficiency of route advertisement.

Before configuring a BGP4+ peer group, familiarize yourself with the applicable environment,

complete the pre-configuration tasks, and obtain the required data. This can help you complete

the configuration task quickly and accurately.

Applicable Environment

A great number of peers exist in a large-scale BGP4+ network, which is not convenient for

configuration and maintenance. In this case, you can configure peer groups to simplify the

management and improve the efficiency of route advertisement. According to the AS where the

peers reside, you can classify peer groups into IBGP peer groups and EBGP peer groups. You

can classify EBGP peer groups into pure EBGP peer groups and mixed EBGP peer groups. This

classification is performed according to the position of the peers in the same external AS.

Pre-configuration Tasks

Before configuring a BGP4+ peer group, complete the following task:

Issue 01 (2012-03-15)

Huawei Proprietary and Confidential

8 BGP4+ Configuration

PrefixLength : 128

PrefixLength : 64

PrefixLength : 64

PrefixLength : 64

PrefixLength : 64

PrefixLength : 10