Network Setup - Panasonic TY-FB12LC Operating Instructions Manual

Network Setup
Make the various settings to use the network function.
SET UP
MULTI DISPLAY SETUP
MULTI PIP SETUP
PORTRAIT SETUP
SET UP TIMER
PRESENT TIME SETUP

NETWORK SETUP

DISPLAY ORIENTATION
NETWORK SETUP
SAVE
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
PORT
LAN SPEED
NETWORK ID
CONTROL I/F SELECT
MAC ADDRESS
SAVE
Save the current network Setup. Each value set for
DHCP,IPaddress,Subnetmask,andGatewaywill
besaved.If"NG"isdisplayed,checkthesameIP
address is not used within the same network.
DHCP (DHCP client function)
To obtain an IP address automatically using a
DHCPserver,setthisto"ON".IfDHCPserveris
notused,setthisto"OFF".
IP ADDRESS (IP address display and setting)
EnteranIPaddressifDHCPserverisnotused.
SUBNET MASK (Subnet mask display and setting)
EnterasubnetmaskifDHCPserverisnotused.
GATEWAY (Gateway address display and setting)
EnteragatewayaddressifDHCPserverisnotused.
PORT
Set the port number used for command control.
Theavailablesettingrangeis1024–65535.
When the PJLink™ protocol is used, the port
setting is not necessary.
Notes:
• TouseaDHCPserver,makesuretheDHCPserverisstarted.
• Contactyournetworkadministratorfordetailsonsettings.
4
Great user manuals database on
2/2
DHCP, IP ADDRESS, SUBNET MASK, and GATEWAY settings
1
 SetDHCP.
  W hen"OFF"isselected,IPADDRESSandothersettings
can be set manually.
2
Select the item and press
3
LANDSCAPE
Enter an address.
IP ADDRESS
4
 Select"SAVE"andpress
OFF
192.168. 0. 8
PORT setting
255.255.255. 0
1
 Select"PORT"andpress
192.168. 0. 1
2
Enter a port number.
1024
AUTO
PORT
0
RS-232C
--:--:--:--:--:--
UserManuals.info
Use
1
I
192.168. 0. 8
Use
2
Press
3
Pressing
change.
Use
1
I
01024
Use
2
Press
3
Pressing
number change.
LAN SPEED
Set the connection speed of the LAN environment.
SelectthevaluefromAUTO,10HALF,10FULL,
100HALFor100FULL.
NETWORK ID
Set the ID to identify this unit.
Theavailablesettingrangeis0–99.
CONTROL I/F SELECT
SetwhethertocontrolwithRS-232C(serial)or
LAN.When"LAN"isset,powerindicatorislit
orange when the slot power is turned on, then the
poweristurned"OFF"withremotecontrol(stand-
bystate)regardlessofthe"Slotpower"setting.
MAC ADDRESS
DisplaytheMACaddressofthisunit.However,
the MAC address is not displayed when the
"CONTROLI/FSELECT"issetto"RS-232C".
.
to select a digit.
to change a number.
.
will cancel the address
.
.
to select a digit.
to change a number.
.
will cancel the port