Restricting Operating Capacity According To The Time Slot [Energy Saving Timer]/[Efficient Operation Setting] - Panasonic CZ-256ESMC3 Operating Instructions Manual

Restricting operating capacity according to
the time slot
You can specify time slots when you want
operation capacity reduced.
When set to the 10:00 to 12:00 and 13:00 to 15:00 time slots, the
consumption of electricity/gas is reduced during those time periods.
1
Touch [Energy saving] in "EnergySaving".
1
2
Touch [Energy saving timer].
Enter the identification number (password level 1 or 2) and
z
the "Energy saving timer" screen is displayed.
[Energy saving timer]/[Efficient operation setting*]
2
85
* When using gas heat pump air conditioners
Energy saving
operation
High
Low
10:00
3
Put a check mark in the "Select" column
(3-1), and touch [Set.] (3-2).
The "Setting" dialogue is displayed.
z
3-
1
4
Change the settings.
Item
Start time Set the start and end times for "Timer 1" and
End time "Timer 2".
Use
The setting ranges are as follows.
y Hours: 00 to 23 (1 hour intervals)
y Minutes: 00 to 59 (1 minute intervals)
Note
y You can make the settings extend over
different dates.
Energy saving
operation
12:00 13:00 15:00
3-
2
Explanation
to set the time.
For example: 22:00 to 08:00
Continued on next page