Exposure Lamp - Ricoh V-C3 D081 Field Service Manual

SP4010 001
SP4011 001
4. After lens block replacement, do some copy samples with the ADF. Check these points:
• Do the copies have background?
• Is the copy output of the ADF and platen mode different?
If these problems occur, restore the following SP codes to their previous settings (noted in Step 1):
• SP4609-2
• SP4610-2
• SP4611-2
Or, adjust these SPs until the background is acceptable.

Exposure Lamp

1. Remove:
• Exposure glass (
• Operation panel (
2. Slide the 1st scanner [A] to the cutout in the frame.
3. Remove the exposure lamp [B] (
Sub Scan Reg
Main Scan Reg
p.307)
p.289 "Operation Panel, Top Covers")
x1, x1,
Sub Scan Registration Adjustment
Main Scan Registration Adjustment
x1)
Scanner Unit
4
309