Ricoh V-C3 D081 Field Service Manual page 923

FAX TX Priority
This SP determines whether pushing the off-hook button will interrupt an embedded RCGM
transmission in progress to open the line for fax transaction. This SP can be used only if
SP5816-164 is set to "0".
[0 or 1/ 0 / - ]
187
0: Disable. Setting the fax unit off-hook does not interrupt a fax transaction in progress. If the
off-hook button is pushed during a embedded RCG-M transmission, the button must be pushed
again to set the fax unit on-hook after the embedded RCG-M transmission has completed.
1: Enable. When embedded RCG-M shares a line with a fax unit, setting the fax unit off-hook
will interrupt a embedded RCG-M transmission in progress and open the line for a fax
transaction.
Manual Polling
200
No information is available at this time.
Regist: Status
Displays a number that indicates the status of the @Remote service device.
0 Neither the registered device by the external nor embedded RCG device is set.
The embedded RCG device is being set. Only Box registration is completed. In this
1
status, this unit cannot answer a polling request from the external RCG.
201
The embedded RCG device is set. In this status, the external RCG unit cannot answer
2
a polling request.
The registered device by the external RCG is being set. In this status the embedded
3
RCG device cannot be set.
4 The registered module by the external RCG has not started.
Letter Number
202
Allows entry of the number of the request needed for the embedded RCG.
Confirm Execute
203
Executes the inquiry request to the @Remote Gate Way URL.
Group 5000
4
345