Table of Contents
Advertisement
SCANNER UNIT
June 30, 1998
6.3.5 EXPOSURE LAMP
[C]
[B]
[A]
[D]
A229R670.WMF
[E]
1. Remove the ADF.
2. Remove the scanner rear cover. (See Scanner Wire.)
3. Remove the exposure glass. (See Exposure Glass.)
4. Slide the 1st scanner [A] to the cutout [B] in the rear scanner frame.
5. Remove the exposure lamp [C] (1 screw, 2 connectors).
NOTE: Do not touch the glass surface of the exposure lamp with fingers.
NOTE: When reinstalling, make sure that the front side of the lamp [D] is properly
positioned on the lamp holder [E] as shown.
6-18
Advertisement
Table of Contents
