Ricoh V-C3 D081 Field Service Manual page 817

10 Op Time Setting:ImgTrans
11 Op Time Setting:PaperTrans
12 Adj Reverse Start Time
290
7 PTR Lift DFU
This SP switches the operation of the PTR lift motor off and on. The PTR lift motor presses the PTR
against the fusing belt above during belt-to-paper image transfer and lowers the PTR when it is
idle. This prevents the PTR from warping.
[*0: Lift Operation On]
[1: Lift Operation Off]
2911 Environ Ctrl
These SP codes control the operation of the Peltier unit.
Note: The Peltier unit is not provided as a standard component of this machine. However, it is
available as an option.
1 Environ Ctrl On
4 Op Humidity
5 Stop Humidity
Sets the length of time for the ITB motor
to reverse.
[2 to 500/30/2 msec]
Sets the length of time for the PTR motor
to reverse.
[2 to 500/30/2 msec]
Synchronizes the timing for the K PCU drum motor,
ITB motor and PTR motor to reverse
simultaneously.
[2 to 500/0/2 msec]
Switches Peltier unit control on/off.
*OFF/ON
Sets the humidity level for the Peltier unit to operate.
[0 to 100/60/1%]
Sets the humidity level for the Peltier unit to switch off.
[0 to 100/35/1%]
Group 2000
4
239