Ricoh V-C3 D081 Field Service Manual page 718

3. Appendix: Service Call Conditions
SC 792-2 B
3
SC792-3 B
140
Pre-punch side fence HP error
Detected at HP after the time prescribed to leave the HP had elapsed (more than
400 pulses) (1st detection, jam, 2nd detection, SC error)
-or-
Not detected at HP after the time prescribed to arrive at the HP had elapsed (more
than 600 pulses) (1st detection, jam, 2nd detection, SC error)
• Side jogger motor (M302) connector loose, broken, defective
• Motor overload
• Motor defective
• Pre-punch jogger HP sensor (S301) connector loose, broken, defective
• Sensor (S301) defective
Pre-punch jogger roller HP error
Detected at HP after the time prescribed to leave the HP had elapsed (more than
36 pulses) (1st detection, jam, 2nd detection, SC error)
-or-
Not detected at HP after the time prescribed to arrive at the HP had elapsed (more
than 22 pulses) (1st detection, jam, 2nd detection, SC error)
• Jog roller lift motor (M305) connector loose, broken, defective
• Motor overload
• Motor defective
• Jog roller lift HP sensor (S309) connector loose, broken, defective
• Sensor defective