Printing Test Pattern - Ricoh V-C3 D081 Field Service Manual

2. Installation
3. Select full color mode and print one copy of the chart. You will use this in the ACC procedure, if ACC
is necessary.
4. Check the results of the copy with the customer.
5. With a pencil or pen, mark this copy "Before ACC".
• If the quality of the color is satisfactory, ACC adjustment is not necessary.
2
• If the quality of the color is not satisfactory, do the ACC adjustment described below.
ACC (Automatic Color Calibration) Adjustment
Automatic color calibration is done at the factory with the procedure given below. Do this procedure only
if the color quality is not satisfactory for the customer.
1. Push [User Tools].
2. To print a color pattern, select Maintenance> Auto Color Calibration
3. Touch [Start] for "Copier Function"
Machine will start self-check before

printing Test Pattern

Press [Start Printing].
4. Touch [Start Printing].
Now self-checking.
Test pattern will be printed.
Please wait.
The machine does process control for a few seconds and it prints the test pattern.
80