Gigabit Ethernet Type B (D377-21) - Ricoh V-C3 D081 Field Service Manual

2. Installation
2
4. Remove the controller box cover [A] ( x 3).
5. Connect the power repeater cable [B] to:
CN594
CN4
6. Reattach the controller box cover and rear upper cover.
7. Repeat Steps 1 to 6 to install the connection kit on the second machine.
8. Connect the end of the interface cable [C] to the connection PCB.
9. If additional cable is required, connect the cables [E] with repeater hubs [D].
10. On the operation panel of each machine, remove the second cover [F] from the bottom ("Printer").
11. Install the appropriate key on each machine.
Attach the "Printer/Other Function" key [G] (or its equivalent symbol for EU) if the printer/scanner
option is installed.
-or-
Attach the "Other Function" key [G] (or its equivalent symbol for EU) if the printer/scanner option is
not installed.
12. Attach the other end of the connection cable to the connection PCB installed in the other machine.

Gigabit Ethernet Type B (D377-21)

Accessories
Check the accessories and their quantities against the table below.
270