Ricoh V-C3 D081 Field Service Manual page 927

Table of Contents

Advertisement

CommLog Print
250
Prints the communication log.
5821
Remote Service Address
5824
NVRAM Data Upload
Set the SD card in the Slot 1 (lower slot) then touch [EXECUTE] to upload the NVRAM data
to an SD card.
Note: When uploading in this SP mode data, the front door must be open.
5825
NVRAM Data Download
Set the SD card in the Slot 1 (lower slot) then touch [EXECUTE] to download data from the
card to the NVRAM in the machine. After downloading is completed, remove the card and
turn the machine power off and on.
5828
Network Setting
IPv4 Address (Ethernet/IEEE 802.11)
1
This SP allows you to confirm and reset the IPv4 address for Ethernet and wireless LAN
(802.11): aaa.bbb.ccc.ddd
IPv4 Subnet Mask (Ethernet/IEEE 802.11)
2
This SP allows you to confirm and reset the IPv4 subnet mask for Ethernet and wireless
LAN (802.11): aaa.bbb.ccc.ddd
IPv4 default Gateway
(Ethernet/IEEE 802.11)
3
This SP allows you to confirm and reset the IPv4 default gateway used by the network for
Ethernet and wireless LAN (802.11): aaa.bbb.ccc.ddd
Group 5000
4
349

Advertisement

Table of Contents
loading

This manual is also suitable for:

V-c3 d082

Table of Contents