Ricoh V-C3 D081 Field Service Manual page 757

10 Down Temp: HiTemp 1: 1st CPM
11 Down Temp: HiTemp 1: 2nd CPM
12 Down Temp: HiTemp 1: 3rd CPM
13 Down Temp: HiTemp 2: 1st CPM
14 Down Temp: HiTemp 2: 2nd CPM
15 Down Temp: HiTemp 2: 3rd CPM
16 Determine CPM Interval
1202 Htg Press Roll:Panel Off/Low Power DFU
1 Htg Roll Ctr:Panel off mode
2 Htg Roll Ctr:Low Power Mode
3 Htg Roll End:Panel off mode
4 Htg Roll End:Low Power Mode
5 Press Roll:Panel off mode
6 Press Roll:Low Power Mode
1203 Power Control DFU
[-4 to +4/ 0 / 1]
130
Paper Type Detect
1
These SP settings switch the on/off the paper type detection function.
Two sensors, one mounted above and one below the paper at the registration rollers, detect the
opacity of the first sheet and compares this reading for every subsequent sheet. If the reading is
higher (thicker paper) or lower (thinner paper), the sensor triggers an error.
[0 to 1/1]
0: Enable, 1: Disable
1 Tray 1
2 Tray 2
Down Judgment Temp
Group 1000
4
179