Paper Height Sensors
1. Pull out the tandem tray (Tray 1).
2. Remove:
[A] Right tandem tray ( x2)
[B] Sensor bracket ( x3)
[C] Paper height sensors (
Bottom Plate Lift Wire Replacement
Before replacing the rear bottom plate lift wire, remove the front bottom plate lift wire. It is necessary to
remove the shaft for replacing the rear bottom plate lift wire.
Front Wire
1. Remove the right tandem tray (
2. Remove the paper height sensor bracket (
3. Remove:
[A] Remove the inner cover ( x 2)
x5)
p.431 "Tandem Tray").
p.435 "Paper Height Sensors").
Tandem Tray (Tray 1)
4
435