Ricoh V-C3 D081 Field Service Manual page 956

4. Appendix: Service Program Mode Tables
LCT
The LCT accepts the paper sizes below. Enter the correct number of the size of the paper loaded
in the LCT:
0: A4
2
1: 8 1/2*11
2: B5
3: A4 SEF
4
Copy Server: Set Function
Enables and disables the document server. This is a security measure that prevents image data
from being left in the temporary area of the HDD. After changing this setting, you must switch
the main switch off and on to enable the new setting.
5967
[0 to 1/1]
0: ON
1: OFF
Cherry Server
Selects which version of the Scan Router application program, "Light" or "Full (Professional)",
is installed.
5974
[0 to 1 / 0 / 1 /step]
0: Light version (supplied with this machine)
1: Full version (optional)
Device Setting
The NIC and USB support features are built into the GW controller. Use this SP to enable
5985
and disable these features. In order to use the NIC and USB functions built into the
controller board, these SP codes must be set to "1".
1 On Board NIC
378
4: 8 1/2 * 11 SEF
5: B4 SEF
6: 8 1/2 * 14 SEF