Ricoh V-C3 D081 Field Service Manual page 845

6 M Norm1&Low1:M
7 C Norm1&Low1:C
8 Y Norm1&Low1:Y
3701 Tnr Refresh Mode
These SP settings determine how the toner refresh mode is activated.
5 Image Area Thresh:K
6 Image Area Thresh:M
7 Image Area Thresh:C
8 Image Area Thresh:Y
9 Max Pattern Length
10 Need Ref Length:K
11 Need Ref Length:M
12 Need Ref Length:C
13 Need Ref Length:Y
14 Interrupt Thresh:K
15 Interrupt Thresh:M
16 Interrupt Thresh:C
17 Interrupt Thresh:Y
3702 Set Expel Dev Mode
1 Set Expel Dev Mode
Sets the threshold (percentage of coverage) to trigger toner
refresh mode.
[0 to 25.5/5/0.1%]
Sets the threshold (number of sheets) to trigger toner refresh
mode.
[0 to 25/25/1 mm]
Displays the amount of fresh toner required.
[0 to 65 535/ 0/1 mm]
Sets the threshold for the amount of toner consumption to trigger
toner refresh mode.
[0 to 65 535/ 300/1 mm]
Switches toner purging off/on. Default: ON
Group 3000
4
267