Energy Saving; Energy Save; Energy Saver Modes - Ricoh V-C3 D081 Field Service Manual

7. Energy Saving

Energy Save

Energy Saver Modes

Customers should use energy saver modes properly, to save energy and protect the environment.
The area shaded grey in this diagram represents the amount of energy that is saved when the timers are
at the default settings. If the timers are changed, then the energy saved will be different. For example, if
the timers are all set to 240 min., the grey area will disappear, and no energy is saved before 240 min.
expires.
Timer Settings
The user can set these timers with User Tools (System settings > Timer setting)
• Panel off timer (10 sec – 240 min): Panel Off Mode. Default setting: 60 sec.
• Energy saver timer (1 – 240 min): Low Power Mode. Default setting: 15 min.
• Auto off timer (1 – 240 min): Off/Sleep Mode. Default setting: 30 min.
Normally, Panel Off timer < Energy Saver timer < Auto Off timer. But, for example, if Auto Off timer < or
= Panel Off timer and Energy Saver timer, the machine goes immediately to Off mode when the Auto Off
timer expires. It skips the Panel Off and Energy Saver modes.
Example
• Panel off: 1 min.
7
567