Ricoh V-C3 D081 Field Service Manual page 803

13 Side2:SepDC
14 Side2:SepAC
275
Sp1 FC Bias
6
Set Bias for Special Paper 1: K. These SPs set the standard values of the electrical charges that
are applied to 1) create bias for image transfer from drum of each color (Y, M, C, K) to the ITB,
2) create bias for image transfer from ITB to paper (PTR), and 3) neutralize the charges on the
both sides of the paper to separate the paper from the ITB (SepDC, SepAC). These settings are
used only for Y, M, C, K when printing on Special Paper 1 in the full-color mode and are applied
only to the image area.
1 ITB:K
2 ITB:M
3 ITB:C
4 ITB:Y
13 Side1:PTR
14 Side1:SepDC
15 Side1:SepAC
21 Side2:PTR
22 Side2:SepDC
23 Side1:SepAC
These SPs set the paper size correction coefficients for Special Paper 1 relative to the settings done with
SP2308 (Set Psize Thresh). All of hese settings:
• Apply to printing on Special Paper 1 in the black-and-white mode
• Apply only to the image area
The title of each SP tells you the side and size where the setting is applied at ITB-to-paper transfer, for
example: "Side1:Size1:PTR" means the setting applies to only the first side of Size 1 when the image is
transferred from belt to paper.
277
LEdge Cor:Sp1:K
1
[0 to 10/0.1 μa]
[8 to 12/0.1 kV]
[0 to 70/0.1 μa]
[0 to70/0.1 μa]
[0 to 70/0.1 μa]
[0 to 70/0.1 μa]
[-100 to 0/1 μa]
[0 to 10/0.1 μa]
[8 to 12/0.1 kV]
[-100 to 0/1 μa]
[0 to 10/0.1 μa]
[8 to 12/0.1 kV]
Group 2000
4
225