Ricoh V-C3 D081 Field Service Manual page 18

FM1 Z-Folding (Same as Z-Fold Unit, B660)
FM2 Half Fold
FM3 Letter Fold-out
FM4 Letter Fold-in
FM5 Double Parallel Fold
FM6 Gate Fold
The Ring Binder (D392) jogs, stacks, punches up to 50 or 100 sheets (depending on the size of the rings)
and then binds them with rings. The ring-bound copies are delivered to a tray inside the ring binder.
D014/D015 and D081/D082 Detailed Comparison Tables
General Comparison
Item
ADF
Fusing unit
Jam reduction
16
D014/D015
ARDF. 2-side scanning by
duplexing.
Employs hot roller, pressure
roller, heating roller with
cleaning unit.
There were reports from the
field about duplexer jams.
D081/D082
ADF. Simultaneous 2-side scanning with CIS
scanning the rear side without duplex feeding.
Employs nearly identical hardware and unit
layout of the previous machine. However, the
following features have been improved: 1)
warm-up time, 2) production capacity (cpm), 3)
less frequent servicing due to longer service lives
of key components
Key parts have been replaced in the duplex unit
to improve paper feed. Also, a knob has been
added to the side of the duplex unit to facilitate
the removal of jammed paper.