Sp Adjustments After Laser Unit Replacement - Ricoh V-C3 D081 Field Service Manual

4. Replacement and Adjustments

SP Adjustments After Laser Unit Replacement

4
SP codes are written on an A5-size sheet of paper provided with the laser unit.
• Only the settings shown with the first barcode (2-Point Target) are required. The other information on
the sheet can be ignored.
1. Enter the values under the first bar code for the following SP codes. These "2-Point Target" must be
entered after the LD unit has been replaced.
• 2156-1 (K)
• 2156-2 (M)
• 2156-3 (C)
• 2156-4 (Y)
2. Set the following SP codes to "0":
• 2102-10
• 2102-11
• 2102-12
• 2102-13
3. Next, do these SP codes and enter the values for LD0-1.
• 2102-5
• 2102-6
• 2102-7
• 2102-8
322