3000-Sheet Finisher (B830-17), Finisher Adapter Type C (D375)
4. Connect the finisher cable [D] to the copier
5. Push in the locking lever [A].
6. Check that the top edges of the finisher are parallel with edges of the device (or copier) to the right.
7. Fasten the locking lever [A] ( x 1)
8. Close the front door.
2
9. Set the leveling shoes [A] (x4) under the feet.
10. Turn the nuts to adjust the height of the finisher until it is level.
Updating the Firmware
1. If the machine is on, switch it off.
225