Image Transfer Unit - Ricoh V-C3 D081 Field Service Manual

Common Procedures

Image Transfer Unit

4
1. Cover the floor or a table with paper to prepare a place to put the image transfer unit.
2. Open the front door.
3. Remove the toner hopper, then push the hopper rails into the machine.
4. Rotate the transfer belt release lever [A] down to the left until it stops.
5. Rotate the lever B2 [B] on the drawer unit counter-clockwise to separate the transfer roller from the
ITB.
6. Disconnect [C].
7. Remove the faceplate [D] ( x1, x5).
8. Use the handle [A] on the front of the transfer unit to pull the unit [B] partially out of the machine.
299