Ricoh V-C3 D081 Field Service Manual page 91

• Do not remove the VM card from Slot 2 (lower slot). The VM card must remain in the machine.
Update Procedure for App 2 Me Provider
Follow this procedure to update AP2 Me if a new version is available.
1. Push the [User/Tools] key on the operation panel.
2. If an administrator setting is registered for the machine, Step 3 and Step 4 are required. Otherwise,
skip to step 5.
3. Push [Login/Logout] on the operation panel.
4. Login with the administrator user name and password.
5. Touch "Extended Feature Settings" twice on the LCD.
6. Touch each of the applications until the status changes to "Stop".
7. Turn the machine off, and then remove the VM Card.
8. Prepare the newer App 2 Me Provider zip file from the Firmware Download Center, and then unzip
the zip file. (The folder name is "337051920".)
9. Copy the App 2 Me Provider folder into the specified path for the VM card. The path is:
"SD_Card Drive\ sdk\dsdk\dist\337051920"
1. Turn the SD card label face to the rear of the machine, and then push it slowly into Slot 2 (lower slot)
until you hear a click.
2. Turn the main power switch on.
3. Press [User Tools] on the operation panel.
4. Touch the "Extended Feature Settings" button twice.
Main Machine D081/D082
2
89