Ricoh V-C3 D081 Field Service Manual page 469

1. Remove the old NVRAM.
2. Attach the new NVRAM.
Download NVRAM Data from SD Card
1. Turn the copier main power switch off.
2. Put the SD card with the NVRAM data into Slot 1 (lower slot).
3. Open the front door of the copier.
4. Turn the copier main power switch on.
If the NVRAM is new, SC195 (Machine Serial Number Error) may appear. If this occurs:
• Enter the SP mode and do SP5801 001 to reset the memory to the defaults (All).
• Switch the machine off/on and start from Step 1.
• If SC195 occurs, the serial number must be input. You must contact your technical supervisor.
5. Execute SP5825 to download the data uploaded from the old NVRAM.
6. Switch the machine off and remove the SD card.
7. Switch the machine on, then do SP5990-1 to print another SMC report.
8. Compare this new SMC report with the report you printed in Step 1. If any of the SP settings are
different, enter the SP settings of the first report.
9. Execute SP5907 and enter the brand and model name of the machine for Windows Plug & Play
capability.
• If the client is using any VM card applications, such as App2 Me, you must do the procedure to
re-start these VM applications. ( p.305 "Before Removing and Re-installing the VM Card")
Boards
4
467