Docking The Cover Interposer Tray B835 - Ricoh V-C3 D081 Field Service Manual

2. Installation

Docking the Cover Interposer Tray B835

2
1. Fasten the joint bracket [A] to the cover interposer tray ( x4).
2. Dock the finisher.
Firmware Update
Install the latest version of the firmware for the cover interposer tray.
The cover interposer may not operate correctly with the D081/D082 unless the most recent version of the
firmware is installed.
North America Only
When the Cover Interposer Tray (B835) is installed, be sure to check the FCC Class-A decal is attached
to the copier below its serial number decal.
• This decal is included with the Finisher Adapter (D375) because the Cover Interposer Tray CI5000
(B835) is always installed with Finisher Adapter (D375) and the 3000-Sheet Finisher (B830).
• For more details see "3000-Sheet Finisher (B830), Finisher Adapter (D375)" in this installation section.
156