Ricoh V-C3 D081 Field Service Manual page 432

4. Replacement and Adjustments
• Reverse trigger roller assembly (
• Jogger fences (
• Left transport cover (
• Jogger motor assembly (
2. If you are replacing the belt, set both jogger fence brackets at the center of the belt and tighten the
screw [A].
-or-
If you are adjusting the belt, loosen the screw and slide the plastic piece [B] on the belt to the left or
right to adjust the position of the front fence, then tighten the screw.
4
430
p.425 "Duplex Unit Sensors")
p.425 "Duplex Unit Sensors")
p.425 "Duplex Unit Sensors")
p.429 "Duplex Jogger Motor")