Ricoh V-C3 D081 Field Service Manual page 715

Fold Plate Motor Error
The fold plate HP sensor did not detect the fold plate in (or out of) its home position
within the prescribed time. The 1st occurrence causes a jam, and the 2nd
occurrence causes this SC code.
SC783-10 B
• Fold plate HP sensor dirty
• Sensor harness or connector loose, broken, defective
• Fold plate motor harness or connector loose, broken, defective
• Sensor defective
• Motor or motor drive board defective
Jogger Fence Motor
The jogger fence HP sensor did not detect the jogger fence in (or out of) its home
position within the prescribed time. The 1st occurrence causes a jam, and the 2nd
occurrence causes this SC code.
SC783-11 B
• Jogger fence HP sensor dirty
• Sensor harness or connector loose, broken, defective
• Jogger fence motor harness or connector loose, broken, defective
• Sensor defective
• Motor or motor drive board defective
Positioning Roller Motor Error
The positioning roller HP sensor did not detect the positioning roller in (or out of)
its home position within the prescribed time. The 1st occurrence causes a jam, and
the 2nd occurrence causes this SC code.
SC783-12 B
• Positioning roller HP sensor dirty
• Sensor harness or connector loose, broken, defective
• Positioning roller motor harness or connector loose, broken, defective
• Sensor defective
• Motor or motor drive board defective
Service Call Tables
Multi Folder (D454)
Multi Folder (D454)
Multi Folder (D454)
137
3