Ricoh V-C3 D081 Field Service Manual page 127

2. Open the LCT top cover [A].
3. Check the position markers on plate [B].
• If the fences are set for A4 and you intend to load A4, the LCT is ready and you do not need to
do the following steps.
• If the fences are set for A4 and you intend to load LT, do the steps below.
4. Cover the photosensor [A] with your left hand.
5. Press the bottom plate operation button [B] until the bottom plate [C] is completely down, then release
the button [B].
LCT (B473), LCT Adapter Type B (B699)
2
125