Ricoh V-C3 D081 Field Service Manual page 629

No. Component
S1 Entrance Sensor
S2 Original Width Sensor 2
S3 Original Width Sensor 3
S4 Original Width Sensor 4
S5 Original Width Sensor 5
S6 Original Width Sensor 1
S7 Original Set Sensor
S8 Bottom Plate HP Sensor
S9 Feed Cover Sensor
S10 Bottom Plate Position Sensor
S11 Original LG Detection Sensor
S12 Original A4 Detection Sensor
S13 Original B5 Detection Sensor
S14 Skew Correction Sensor
S15 Separation Sensor
Function
Detects the leading edge of the original when it enters the
ADF
Detects paper wider than 191.5 mm (7.5 in.) measured
from the reference point.
Detects paper wider than 230 mm (9.1 in.) measured
from the reference point.
Detects paper wider than 263.5 mm (10.4 in.) measured
from the reference point.
Detects paper wider than 288 mm (11.3 in.) measured
from the reference point.
Detects paper wider than 138 mm (5.4 in.) measured
from the reference point.
Detects whether an original is on the table.
Detects whether the bottom plate is in the down position
or not.
Detects whether the feed cover is open or not.
Detects when the original is at the correct position for
feeding.
Detects paper longer than 318 mm (12.5 in.) on the
original table.
Detects paper longer than 291 mm (11.5 in.) on the
original table.
Detects paper longer than 240 mm (9.5 in.) on the
original table.
After pick-up and separation, the skew correction sensor
detects the leading edge of the original. This signal slows
the rotation of the entrance roller for a prescribed number
of pulses to buckle the original and correct skew.
Detects the separation of the original.
Specifications
1
51