Ricoh V-C3 D081 Field Service Manual page 914

4. Appendix: Service Program Mode Tables
Turns the remote diagnostics off and on.
[0 to 2/1]
0: Remote diagnostics off.
1: Serial (CSS or NRS) remote diagnostics on.
2: Network remote diagnostics.
2 CE Call
Lets the customer engineer start or end the remote machine check with CSS or NRS; to do
this, push the center report key.
3 Function Flag
4
Enables and disables remote diagnosis over the NRS network.
[0 to 1/1]
0: Disables remote diagnosis over the network.
1: Enables remote diagnosis over the network.
5 Device Information Call
Controls if the item for initial setting of the screen for the NRS device-information notification-
call is shown.
[0 to 1/1]
0: Enabled. Item initial setting not shown.
1: Disable. Item for initial setting shown.
7 SSL Disable
Controls if RCG (Remote Communication Gate) confirmation is done by SSL during an RCG
send for the NRS over a network interface.
[0 to 1/1]
0: Yes. SSL not used.
1: No. SSL used.
8 RCG Connect Timeout
Sets the length of time (seconds) for the time-out when the RCG (Remote Communication
Gate) connects during a call via the NRS network.
[1 to 90/1 sec.]
9 RCG Write to Timeout
336