Ricoh V-C3 D081 Field Service Manual page 755

12 Large Size:1-S: 2nd
1111 Measure Mode
Nip Width Measurement Setting Mode
1 Nip Width:Execute
2 Nip Width:Stop Time
3 Nip Width:Stop Interval
4 Nip Width:Htg Roll Temp:Ctr
5 Nip Width:Htg Roll Temp:End
6 Nip Width:Press Roll Temp
11 Belt:0:off 1:on
12 Belt:Rotation Time
13 Belt:Htg Roll Temp:Ctr
14 Belt:Htg Roll Temp:End
15 Belt:Press Roll Temp
111
Fuser Unit In/Out DFU
2
Fusing Unit: In/Out: Start Fusing Unit
Determines whether the fusing unit operates during the copy cycle for image creation and paper
feed.
[*1: In] [0: Out]
1113 Fusing SC Issue Time Info DFU
24 Small Size: Ctrl Time 2
Determines whether the nip at the hot roller and
pressure roller is calibrated. Touch [Execute].
Determines the down time of the fusing/exit
motor in the fusing nip band calibration mode.
[1 to 100/1 sec.]
Determines the intervals between the down times
of the fusing/exit motor in the nip band
calibration mode.
[0 to 2000/100 msec.]
Group 1000
4
177