Ricoh V-C3 D081 Field Service Manual page 259

Installation
1. Remove the cover of Slot B [A] ( x 2).
2. Touch a metal surface to discharge any static electricity from your hands.
3. Put the interface board in Slot B [B].
4. Confirm that the board is inserted completely, then fasten it ( x 2).
5. Pull the antennas [C] away from machine and make sure that they are not tangled.
6. Look at the markings on the antenna bracket.
• ANT1. Antenna 1 transmits and receives. It must be installed on the left front corner of the main
machine. (The core on the Antenna 1 cable is black.)
• ANT2. Antenna 2 only receives. It is installed on the right rear corner of the machine.
MFP Controller Options
2
257