Exposure Leds (Exposure Lamp) - Ricoh MP 7503SP Field Service Manual

4. Confirm that the FFC is locked and straight.
5. After reassembly, do the scanner and printer adjustments. page 985

Exposure LEDs (Exposure Lamp)

• The Exposure LEDs (exposure lamps) are comprised of a pair of LED arrays mounted on separate
brackets. Either bracket can be removed separately.
1. Remove the exposure glass. page 516
2. Remove the front edge plate.
3. Slowly, pull the Exposure LED pair toward the center of the scanner unit until both ends are even
with the cutouts in the frame at the front and back.
Left Exposure LED
Scanner Unit
533