Ricoh V-C3 D081 Field Service Manual page 621

No. Component
Rear Side Fence Open
S27
Sensor
Rear Side Fence Closed
S28
Sensor
S29 Right Tray Down Sensor
Paper Near End Sensor -
S30
Tray 1
S31 Paper Height Sensor
S32 Paper Height Sensor
S33 Paper Height Sensor
S34 Right Tray Paper Sensor
S35 Rear Fence HP Sensor
S36 Rear Fence Return Sensor
S37 Left Tray Paper Sensor
Internal Temperature
S38
Sensor
S39 Waste Toner Lock Sensor
Duplex Transport Sensor
S40
1
Detects the actuator on the rear side fence after it has reached
the open position in the tandem tray.
Detects the actuator on the rear side fence after it has reached
the closed position in the tandem tray.
Detects the bottom plate of the right tray and switches off the
tray 1 lift motor and stops the bottom plate.
Signals 10% paper remaining when the actuator on the right
rail of the right tray in the tandem tray passes.
Signals 100% paper remaining until activated. Signals 50%
paper remaining when the actuator on the left rail of the right
tray in the tandem tray passes.
Signals 30% paper remaining when the actuator on the left rail
of the right tray in the tandem tray passes.
When near end sensor 1 on right rail of the right tray of the
tandem tray is actuated, and paper height sensor 3 has
detected the passing of the actuator on the left rail, then the
near end sensor signals 10% paper remaining.
Detects paper in the right side of the tandem paper tray.
Detects the actuator on the rear fence in the tandem tray and
switches off the rear fence motor.
Detects the actuator on the rear fence in the tandem tray and
reverses the rear fence motor.
Detects the presence of paper in the left tray of the tandem tray.
Located near the Y_PCU, this thermistor monitors the internal
temperature of the machine.
Signals an alert if the waste toner collection coil locks and stops
rotating.
The feeler of this sensor detects the leading edge and trailing
edge of each sheet as it passes from the jogger unit above and
into the horizontal feed path of the duplex unit below. Signals
a jam if the paper does not arrive at or reach the sensor location
at the prescribed time.
Specifications
Function
1
43